95UVS2-1CEX Fireye Scanner

Part number 95UVS2-1CEX from Fireye, listed in Disconnect Switches. KKM Solutions quotes this part with pricing and availability confirmed per order.

Overview The Fireye 95UVS2-1CEX InSight is a microprocessor-based, integrated ultraviolet flame scanner designed for industrial burner management and safety. This enhanced S2 model features an explosion-proof “CEX” housing, making it suitable for hazardous environments. It utilizes advanced solid-state UV sensor technology to monitor flame presence and provide reliable discrimination in complex combustion systems, eliminating the need for a separate remote flame amplifier by incorporating an internal flame relay. Features Solid-state ultraviolet (UV) sensor for high-sensitivity detection of gas and light oil flames. Integrated flame relay (SPST N.O.) and fault relay (SPST N.C.) built directly into the scanner. AutoTune capability allows the scanner to automatically select optimum settings for gain, frequency, and thresholds. Electronic self-checking technology ensures fail-safe operation without the need for a mechanical shutter. Explosion-proof housing rated EExd IIC T6 and ATEX approved for use in volatile environments. User interface featuring an eight-character alphanumeric LED display and a four-button keypad for local monitoring and setup. Multiple setpoint files (up to 4) can be stored to accommodate different fuels or firing conditions. Specifications Input Power: 24 Vdc (+10%, -15%). Spectral Range: UV (295 to 320 nm). Output: 4-20 mA analog output for flame signal strength. Flame Failure Response Time (FFRT): Selectable from 1 to 6 seconds. Housing: Cast aluminum with gray polyester powder coat; NEMA 4X / IP66 rated. Operating Temperature: -40 degree F to +150 degree F (-40 degree C to +65 degree C). Electrical Connection: 12-pin quick-disconnect connector or captive cable. Weight: Approximately 13.2 lbs (5.98 kg) for CEX models. Applications The 95UVS2-1CEX is ideal for industrial and commercial sectors including oil and gas, petrochemical, power generation, and pulp and paper. It is specifically designed for single or multi-burner applications where high discrimination between the target flame and background radiation is required. It is commonly used to monitor flames from gaseous fuels and light oils in boilers, furnaces, and kilns located in hazardous areas requiring explosion-proof equipment.