Skip to content
The Outlook server is temporarily down. Please send your requests to us on WhatsApp.
Stock is confirmed when you order, and we will advise you as soon as your order is confirmed. Need help with a part? Email orderdesk@kkmsolutions.com.
Ships worldwide — lead time quoted per part orderdesk@kkmsolutions.com
KKM Industrial and Automation Solutions Industrial Automation & MRO Parts Need a part? Email the order desk orderdesk@kkmsolutions.com
Email the order desk Get a quote
Sensors & Measurement

Omron E2E and E3Z Part Numbers Decoded

KKM Solutions · November 18, 2026

How to read an Omron E3Z photoelectric or E2E proximity sensor number, what each letter and digit means, and how to match an old E2E-X to E2E NEXT.

Omron E2E and E3Z Part Numbers Decoded — KKM Solutions technical article

An Omron sensor number is not a random string. In the E3Z photoelectric family and the E2E proximity families, each letter and digit stands for one property: sensing method, output type, connection and cable. Once you can read the code you can tell what an unlabelled spare is, spot a wrong substitute, and find the current model when an old one is no longer listed. Everything below comes from Omron's own lineup tables.

How do you read an E3Z photoelectric sensor number?

Take E3Z-D82 2M. After E3Z- come three parts: a letter for the sensing method, a digit for the output, and a digit for the connection and range. The cable length comes last.

PositionCodeMeaning
Sensing methodTThrough-beam (emitter and receiver)
RRetroreflective with MSR (polarising) function
DDiffuse-reflective
LNarrow beam (L61) or limited-reflective for clear glass (L63)
LSDistance-settable (background or foreground suppression)
GSlit-type through-beam
BRetroreflective without MSR, for clear plastic bottles
First digit6 / 86 = NPN output, 8 = PNP output
Second digit1, 2, 3Pre-wired cable; the digit also picks the range variant
6, 7, 8Standard M8 connector version of 1, 2 and 3
Cable2M2 m pre-wired cable

So E3Z-D82 2M is a diffuse-reflective sensor with PNP output, the 1 m range variant, on a 2 m cable. Its NPN twin is E3Z-D62 2M, and its M8 connector version is E3Z-D87. The short-range diffuse model is E3Z-D61 (NPN) or E3Z-D81 (PNP), rated 5 to 100 mm. For through-beam, E3Z-T61 is rated 15 m and E3Z-T62 30 m, both infrared. If you are not sure which method you need, see picking a photoelectric sensing mode.

What do the E3Z suffix letters mean?

  • A after a through-beam number (E3Z-T61A): red light instead of infrared, with a shorter rated distance.
  • K (E3Z-D61K): the oil-resistant version.
  • -L and -D at the end of a through-beam number: the emitter alone and the receiver alone. E3Z-T61-L 2M is just the emitter. Do not confuse this -D (receiver) with the D for diffuse at the start of the code.
  • -M1J 0.3M: M12 pre-wired connector on a 0.3 m cable.
  • -M1TJ 0.3M: M12 Smartclick pre-wired connector on a 0.3 m cable.
  • -M3J: M8 pre-wired connector, used on the oil-resistant and slit models.

Retroreflective models do not include a reflector. The rated distance assumes the reflector named in Omron's table, so a different reflector can change the range. For connector pinouts, see the M8 and M12 connector reference.

How do you read an older E2E-X proximity sensor number?

The older cylindrical E2E DC models follow the pattern E2E-X + sensing distance + optional M + output letter + contact digit. Take E2E-X5ME1:

  • X5: 5 mm rated sensing distance.
  • M: unshielded (non-flush). No M means shielded, so E2E-X5E1 is the shielded version.
  • E: DC 3-wire NPN output. F is DC 3-wire PNP and D is DC 2-wire.
  • 1: normally open. 2 is normally closed.

A -M1 suffix means an M12 connector instead of a cable, and 2M or 5M gives the cable length in metres. The old code does not include the thread size of the housing, so measure it or read it from the old label. The difference between shielded and unshielded mounting is covered in flush vs non-flush proximity sensor mounting.

What replaced the E2E-X DC models?

Omron's E2E page says the DC 2-wire and 3-wire models (E2E-X[]D[], E2E-X[]E[] and E2E-X[]F[]) have been integrated into the E2E NEXT series. E2E NEXT uses a different code, so an old number does not carry over letter for letter.

How do you read an E2E NEXT number?

Take E2E-X9B1D12 2M:

PartCodeMeaning
Sensing distanceX99 mm
Shielding(none) / MNo letter = shielded, M = unshielded
OutputB / CB = PNP, C = NPN
Contact1 / 21 = normally open, 2 = normally closed
IO-LinkT / DOn PNP normally-open models: T = IO-Link COM3, D = IO-Link COM2
BodyLLong body; no L = standard length
Thread size8, 12, 18, 30M8, M12, M18 or M30 housing
Connection2M, -M1, -M3, -M5, -M1TJ2 m cable, M12 connector, M8 4-pin, M8 3-pin, M12 Smartclick pigtail

So E2E-X9B1D12 2M is a shielded M12 sensor, 9 mm, PNP normally open with IO-Link COM2, on a 2 m cable. Omron's table states that IO-Link is not offered on the normally-closed PNP models or on any NPN model; on IO-Link models the normally-open output can be switched to normally closed over IO-Link. An -R in the number means a robot (bending-resistant) cable. More on what IO-Link adds: what IO-Link changes on the plant floor.

Which letters change meaning between the old and new code?

Three traps catch people matching an E2E-X to an E2E NEXT:

  • The output letter changes. Old E (NPN) becomes C; old F (PNP) becomes B.
  • D means something different. In the old code D is DC 2-wire. In E2E NEXT, a D after B1 means IO-Link COM2 on a 3-wire PNP sensor.
  • The number after X usually goes up. E2E NEXT models of the same thread size are rated for longer sensing distances, so the X number of the new model is not the same as the old one.

The smaller-diameter E2E models (such as E2E-C04S12 or E2E-S05S12) end in -C1, -C2, -B1 or -B2, with the same C = NPN and B = PNP letters.

How do you match an old Omron sensor to a current one?

  1. Write down the full number from the label, including cable length and suffixes.
  2. Decode it: method or shielding, output type, normally open or closed, connection.
  3. For an E2E-X, measure the housing thread and body length, because the old code does not give them.
  4. In the current Omron table, keep the housing size, shielding, output type, contact and connection the same, then check the rated distance and body length fit the bracket.
  5. Check the wiring: an NPN and a PNP sensor are not interchangeable without changing the input card or wiring. See NPN vs PNP sensor wiring.

The general method for other brands is in how to cross-reference a discontinued sensor, and the two makers are compared in Omron vs Keyence photoelectric sensors.

Questions people ask about Omron sensor numbers

What is the difference between E3Z-D61 and E3Z-D81?

Both are diffuse-reflective sensors rated 5 to 100 mm on a pre-wired cable. E3Z-D61 has an NPN output and E3Z-D81 a PNP output.

Is the E3Z discontinued?

Omron's lineup page still lists the E3Z family as current. Individual variants can change, so check your exact number on Omron's site.

What does 2M mean at the end of an Omron number?

It is the cable length: a 2 m pre-wired cable. 5M means 5 m.

Is E2E-X5ME1 shielded?

No. The M after the distance means unshielded. The shielded 5 mm version is E2E-X5E1.

Can I replace an NPN sensor with a PNP one?

Not directly. The output switches the opposite side of the supply, so the input it feeds must match. Wiring changes are work for a qualified person.

Further reading on this site: NPN vs PNP sensor wiring; how to cross-reference a discontinued sensor; flush vs non-flush proximity sensor mounting; picking a photoelectric sensing mode; M8 and M12 connector reference; what IO-Link changes on the plant floor; Omron vs Keyence photoelectric sensors; request a quote.

Replacing an Omron sensor? Request a quote with the full number from the label, including the cable length and every suffix, and we will source against that exact reference.

Need a quote on a specific part?

Our order desk replies within 1 business day. No account needed. Or email orderdesk@kkmsolutions.com.

Request a Quote