Weidmuller WFF 120
Weidmuller 1028500000 - Feed-through and PE terminal Blocks - Width: 42 mm mm; Height: 132 mm mm; Storage Temperature: -25 °C...55 °C.
Weidmuller 1028500000 is a Feed-through and PE terminal Blocks catalog item from Weidmuller. The manufacturer's published data for this part number specifies Width: 42 mm mm and Height: 132 mm mm.
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 120 mm², Threaded stud connection, Direct mounting
The specification set recorded for this part number covers Storage Temperature: -25 °C...55 °C; Nominal current: 269 A; Type of mounting: Snap-on; Ambient temperature: -50 °C…75 °C; Type: WFF 120; Depth: 72 mm; Net weight: 246.662 g; Colour: dark beige; Rated voltage: 1,000 V; ROHS: Conform; Certificate No. (UR): E60693; Certificate No. (cURusEX): E184763. The complete technical table is shown in the Specifications tab on this page.
| 2 x cable lugs DIN 46 234 | 6 to 120 mm² |
|---|---|
| 2 x cable lugs DIN 46 235 | 16...120 mm² |
| Ambient temperature | -50 °C…75 °C |
| Basic material | Wemid |
| Cable lug to DIN 46234 | 6...150 mm² |
| Cable lug to DIN 46235 | 16...150 mm² |
| Certificate No. (CSA) | 200039-1244019 |
| Certificate No. (cURusEX) | E184763 |
| Certificate No. (IECEX) | IECEXULD15.0004U |
| Certificate No. (UR) | E60693 |
| Clamping range, max. | 150 mm² |
| Clamping range, min. | 6 mm² |
| Colour | dark beige |
| Conductor size Factory wiring max. (UR) | 250 kcmil |
| Conductor size Factory wiring min. (UR) | 10 AWG |
| Conductor size Field wiring max. (UR) | 250 kcmil |
| Conductor size Field wiring min. (UR) | 10 AWG |
| Connection cross-section, finely stranded, min. | 6 mm² |
| Connection cross-section, stranded, max. | 150 mm² |
| Connection cross-section, stranded, min. | 6 mm² |
| Connection direction | on side |
| Continuous operating temp., max. | 120 °C |
| Continuous operating temp., min. | -50 °C |
| Current (IECEX) | 269 A |
| Current at maximum wires | 309 A |
| Current size C (CSA) | 310 A |
| Current size C (UR) | 310 A |
| Depth | 72 mm |
| Depth (inches) | 2.835 inch |
| Depth including DIN rail | 80.5 mm |
| ECLASS 14.0 | 27-25-01-01 |
| ECLASS 15.0 | 27-25-01-01 |
| End cover plate required | No |
| ETIM 10.0 | EC000897 |
| ETIM 8.0 | EC000897 |
| ETIM 9.0 | EC000897 |
| Ex 2014/34/EU label | II 2 G D |
| Explosion-tested version | Yes |
| GTIN (EAN) | 4008190004866 |
| Height | 132 mm mm |
| Height (inches) | 5.197 inch |
| Installation advice | Direct mounting |
| Levels cross-connected internally | No |
| Marking EN 60079-7 | Ex eb II C Gb |
| Max. voltage (IECEX) | 1100 V |
| Mounting rail | TS 35 |
| Net weight | 246.662 g |
| Nominal current | 269 A |
| Number of clamping points per level | 2 |
| Number of connections | 2 |
| Number of levels | 1 |
| Number of potentials | 1 |
| Number of similar terminals | 1 |
| Open sides | closed |
| Order No. | 1028500000 |
| PE connection | No |
| Pollution severity | 3 |
| Power loss in accordance with IEC 60947-7-x | 8.61 W |
| Qty. | 5 items |
| Rated cross-section | 120 mm² |
| Rated DC voltage | 1,500 V |
| Rated impulse withstand voltage | 8 kV |
| Rated voltage | 1,000 V |
| REACH SVHC | No SVHC above 0.1 wt% |
| ROHS | Conform |
| RoHS Compliance Status | Compliant without exemption |
| Standards | IEC 60947-7-1 |
| Storage Temperature | -25 °C...55 °C |
| Stud size for spade connection | M 10 |
| Tightening torque (max) | 20 Nm Nm |
| Tightening torque, min. | 10 Nm |
| Type | WFF 120 |
| Type of connection | Threaded stud connection |
| Type of mounting | Snap-on |
| UL 94 flammability rating | V-0 |
| Version | Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 120 mm², Threaded stud connection, Direct mounting |
| Voltage size C (CSA) | 600 V |
| Voltage size C (UR) | 1000 V |
| Volume resistance according to IEC 60947-7-x | 0.12 mΩ |
| Width | 42 mm mm |
| Width (inches) | 1.654 inch |
| Wire connection cross section AWG, max. | kcmil 250 |
| Wire connection cross section AWG, min. | AWG 8 |
| Wire connection cross section, finely stranded, max. | 150 mm² |
| Wire connection cross section, finely stranded, min. | 6 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. | 6 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 6 mm² |
| Wire connection cross-section, solid core, max. | 150 mm² |
| Wire connection cross-section, solid core, min. | 6 mm² |
| Wire cross section max. (CSA) | 250 kcmil |
| Wire cross section max. (IECEX) | 120 mm² |
| Wire cross section min. (CSA) | 10 AWG |
Frequently Asked Questions
How do I get pricing for 1028500000?
KKM Solutions is a quote-based industrial supplier, so prices are not listed online. Send the quote form on this page with your quantity, or email [email protected], and our order desk will reply with pricing and availability within 1 business day.
Who manufactures the 1028500000?
1028500000 is a Weidmuller part. KKM Solutions sources Weidmuller components to the exact manufacturer specification and cross-checks every order against manufacturer part data before it ships.
What are the key specifications of 1028500000?
Key specifications include 2 x cable lugs DIN 46 234: 6 to 120 mm²; 2 x cable lugs DIN 46 235: 16...120 mm²; Ambient temperature: -50 °C…75 °C; Basic material: Wemid. The full specification table on this page lists every published attribute for this part.
How quickly can 1028500000 ship?
In-stock items are dispatched the same business day for orders placed by 11 AM; sourced and quoted items ship per the quoted lead time. KKM Solutions ships worldwide — to your site, warehouse, or freight forwarder.
Related Products
Weidmuller Weidmuller WFF 70 BL
Weidmuller Weidmuller WFF 120 BL
Weidmuller Weidmuller WFF 70
Weidmuller Weidmuller WFF 185 BL
Weidmuller Weidmuller WFF 35 BL
Weidmuller