SLX10 Sprint 24A 4Q 200V to 480V 3ph AC to DC Converter

Part number SLX10 from Sprint, listed in DC & Special Purpose Drives. KKM Solutions quotes this part with pricing and availability confirmed per order.

Sprint Electric SLX Series (Frame 1A) - 24A 4 Quadrant Non-Regenerative Analogue DC Thyristor Drive for 200-480V Supply Typical Motor output - up to 10kW (13.3HP) at 460V DC for motor speed and torque control. Power Cable Entry: Mains Input = Top, Armature Output = Top, 3 Phase Auxiliary (Phasing) = Top for this model Simple to set-up in Analogue, fully-isolated 4 Quadrant form. Frame Size 1A - 204mm Wide x 143mm Deep x 250mm High. Features: Built in Field Weakener for extended speed ranges. 50% peak torque for rapid acceleration or shock loads. Control rails +/- 10V, 12V, 24Vdc Zero reference interlock facility, ideal for extruder applications. Numerous alarms for enhanced drive and motor protection. High accuracy armature voltage feedback mode eliminates the need for additional tacho in most applications. Automatic economy field mode for motor protection in cold climates Torque control input for basic winding and tension control, with over speed limiting. Many other input and output signal terminals, ideal for system applications Regen Stop feature is available within SLX10 Armature output 24A, Field output max 5A .(higher current field option @ 7.5A available) Input Current - 20A for Armature + up to 2.5A for Field. Input Voltage – 12V to 200-480V three phase +-10% at 50/60Hz. Input fuse – 25A - to suit input bridge at 600A²s Note. The 3 phase Field and Armature supplies are input through separate terminals and may be at different levels if desired. Use a choke in the supply at 50uH @ 39A Ventilation: Force Vented Fan Supply source: Control Supply fed Rated at 40C Ambient. Ventilation space above - 160mm. Ventilation space below - 100mm. Ventilation space at sides - 0mm. Heat Loss at max output - 234W. Panel mount with M6 screw fixings on 418 x 140mm centers. Full part number is SLX10 Download the Technical product Manual from the link below...