Compressed air meter - SDG550
IFM SDG550 - Compressed air meter - Weight: 13929; Storage Temperature: -20...85; Display range: -1...20.
This listing covers the IFM SDG550, a part number in the Compressed air meter category. The manufacturer's published data for this part number specifies Weight: 13929 and Storage Temperature: -20...85.
housing sensor: PBT+PC-GF30; PPS GF40; electronics fastener: stainless steel (1.4301 / 304), stainless steel (1.4305 / 303); knurled nut: stainless steel (1.4404 / 316L); Display sealing: FKM
Published specifications for this part include Display range: -1...20; Ambient temperature: 0...60; Connector: 1 x M12; coding: A; Contacts: 4; Protection class: III; Dimensions: 160 x 165 x 225; Number of digital outputs: 2; Application: for industrial applications; Output signal: switching signal; analog signal; pulse signal; IO-Link; (configurable); Product type: Compressed air meter; Accuracy: ± 0,5; (medium flow in the limit area of the flow measurement range); Response time: < 0.1; (dAP = 0, T09); Communication interface: IO-Link. The complete technical table is shown in the Specifications tab on this page.
| Accuracy | ± 0,5; (medium flow in the limit area of the flow measurement range) |
|---|---|
| Accuracy (in the measuring range) | class 141: ± (3 % MW + 0,3 % MEW); class 344: ± (6 % MW + 0,6 % MEW) ; air quality to ISO 8573-1:2010; reference conditions: inlet pipe length >= 166 cm outlet pipe length >= 22 cm; reference temperature: 18..26 °C; standard volume flow 19...2837 m³/h; (standard volume flow DIN_ISO_2533 15 °C , 1013,25 mbar, 0 % r.H.) |
| Ambient temperature | 0...60 |
| Analog current output | 4...20; (scalable) |
| Analog end point | 2.2...16 |
| Analog start point | -1...12.8 |
| Application | for industrial applications |
| Characteristics deviation | < ± 0,5; (BFSL = Best Fit Straight Line) |
| Communication interface | IO-Link |
| Connector | 1 x M12; coding: A; Contacts: 4 |
| Current consumption | < 80 |
| Damping process value dAP | 0...5 |
| Dimensions | 160 x 165 x 225 |
| Display range | -1...20 |
| Dynamic response T05 / T09 | T09 = 0,5 |
| Electrical design | PNP/NPN |
| Greatest TEMPCO of the span | ± 0,3 |
| Greatest TEMPCO of the zero point | ± 0,1 |
| Housing | rectangular |
| In steps of | 0.01 |
| Inputs | counter reset |
| IO-Link revision | 1.1 |
| Key Features | Precise measurement of flow and consumption; High accuracy, repeatability and measurement dynamics; For detecting compressed air in industrial use; With switching output, analog output and pulse output; Clearly visible numerical display |
| Material | housing sensor: PBT+PC-GF30; PPS GF40; electronics fastener: stainless steel (1.4301 / 304), stainless steel (1.4305 / 303); knurled nut: stainless steel (1.4404 / 316L); Display sealing: FKM |
| Materials (wetted parts) | sensor feedthrough: stainless steel (1.4301 / 304), stainless steel (1.4404 / 316L); Sealing sensor - Pipe section: FKM; sensor tip: ceramics glass passivated; PPS GF40; Al2O3 (ceramics); acrylate; Pipe section: steel galvanized (1.0460 / 1.0565); flange: steel galvanized (1.0460 / 1.0565) |
| Max. load | 500 |
| Max. relative air humidity | 90 |
| Max. voltage drop switching output DC | 2.5 |
| Measuring range | -1...16 |
| Media | compressed air |
| Medium temperature | -10...60 |
| Min. process cycle time | 7.2 |
| MTTF | 167 |
| Number of analog outputs | 1 |
| Number of digital outputs | 2 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Operating voltage | 18...30 DC; (to SELV/PELV) |
| Output function | normally open / closed; (configurable) |
| Output signal | switching signal; analog signal; pulse signal; IO-Link; (configurable) |
| Overload protection | yes |
| Pack quantity | 1 pcs. |
| Parameter setting options | hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display unit; totalizer |
| Permanent current rating of switching output DC | 150; (per output) |
| Power-on delay time | 1 |
| Pressure equipment directive | Modul A; can be used for group 2 fluids; group 1 fluids on request |
| Process Connection | flange DN100 according to:DIN EN 10220 |
| Process data analog | 8 |
| Process data binary | 2 |
| Product type | Compressed air meter |
| Protection | IP 65; IP 67 |
| Protection class | III |
| Pulse length | 0.002...2 |
| Pulse output | consumed quantity meter |
| Repeatability | ± 0,2 |
| Required master port class | A |
| Reset point rP | -1...15.92 |
| Resolution | 0.05 |
| Response time | < 0.1; (dAP = 0, T09) |
| Reverse polarity protection | yes |
| SDCI standard | IEC 61131-9 CDV |
| Set point SP | -0.92...16 |
| Short circuit protection | yes |
| SIO mode | yes |
| Specification Summary | Compressed air meter; PNP/NPN; switching signal; analog signal; pulse signal; IO-Link; Measuring range 19...4667 m³/h; Medium temperature -10...60 °C; Pressure rating 16 bar; flange DN100; Connector |
| Storage Temperature | -20...85 |
| Transmission type | COM2 (38,4 kBaud) |
| Type of short-circuit protection | yes (non-latching) |
| Weight | 13929 |
Frequently Asked Questions
How do I get pricing for SDG550?
KKM Solutions is a quote-based industrial supplier, so prices are not listed online. Send the quote form on this page with your quantity, or email orderdesk@kkmsolutions.com, and our order desk will reply with pricing and availability within 1 business day.
Who manufactures the SDG550?
SDG550 is a IFM part. KKM Solutions sources IFM components to the exact manufacturer specification and cross-checks every order against manufacturer part data before it ships.
What are the key specifications of SDG550?
Key specifications include Accuracy: ± 0,5; (medium flow in the limit area of the flow measurement range); Accuracy (in the measuring range): class 141: ± (3 % MW + 0,3 % MEW); class 344: ± (6 % MW + 0,6 % MEW) ; air quality to ISO 8573-1:2010; reference conditions: inlet pipe length >= 166 cm outlet pipe length >= 22 cm; reference temperature: 18..26 °C; standard volume flow 19...2837 m³/h; (standard volume flow DIN_ISO_2533 15 °C , 1013,25 mbar, 0 % r.H.); Ambient temperature: 0...60; Analog current output: 4...20; (scalable). The full specification table on this page lists every published attribute for this part.
How quickly can SDG550 ship?
In-stock items are dispatched the same business day for orders placed by 3 PM; sourced and quoted items ship per the quoted lead time. KKM Solutions ships worldwide — to your site, warehouse, or freight forwarder.
Related Products
IFM Compressed air meter - SDG450
IFM Compressed air meter - SDG750
IFM Compressed air meter - SDG350
IFM Compressed air meter - SDG850
IFM Compressed air meter - SDG080
IFM