Electronic level and temperature sensor - LT3924
IFM LT3924 - Electronic level and temperature sensor - Weight: 509.75; Storage Temperature: -25...80; Ambient temperature: 0...60.
IFM LT3924 is a Electronic level and temperature sensor catalog item from IFM. The manufacturer's published data for this part number specifies Weight: 509.75 and Storage Temperature: -25...80.
stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV
Published specifications for this part include Ambient temperature: 0...60; Connector: 1 x M12; coding: A; Contacts: 4; Protection class: III; Dimensions: Ø 16; Number of digital outputs: 1; Output signal: switching signal; analog signal; IO-Link; Product type: Electronic level and temperature sensor; Communication interface: IO-Link; Measuring range: -20...90; Operating voltage: 18...30 DC; Current consumption: < 50; Reverse polarity protection: yes. See the Specifications tab on this page for the full technical table.
| Active range A | 585 |
|---|---|
| Ambient temperature | 0...60 |
| Analog current output | 4...20, invertible |
| Analog voltage output | 0...10, invertible |
| Cannot be used for | extremely conductive media; adhering media; granulates; bulk material; acids; alkali |
| Communication interface | IO-Link |
| Connector | 1 x M12; coding: A; Contacts: 4 |
| Current consumption | < 50 |
| Dielectric constant of the medium | > 2 |
| Dimensions | Ø 16 |
| Dynamic response T09 | 90 |
| Electrical design | PNP/NPN |
| Factory setting | mineral oils |
| Full signal (current) | 20 |
| Full signal (voltage) | 10 |
| Hysteresis, OP | 4 |
| In steps of | 10 |
| Inactive range I1 / I2 | 104 / 39 |
| IO-Link revision | 1.1 |
| Key Features | Reliable level detection in containers and tanks; For use in water, oils and coolants; User-friendly setting of switching function and switch points; Level and temperature monitoring with just one unit; Clearly visible numerical display |
| Material | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV |
| Materials (wetted parts) | PP |
| Max. load | 500 |
| Max. voltage drop switching output DC | 2.5 |
| Measuring error | ± 5 |
| Measuring range | -20...90 |
| Media | hydrous coolants; oils; oil-based media; water; media similar to water |
| Medium temperature | 0...35; (with climate tube E43102 35...55 °C) |
| Medium temperature short time | 0...90; (< 1 h) |
| Min. load resistance | 2000 |
| Min. process cycle time | 4.5 |
| MTTF | 223 |
| Number of analog outputs | 1 |
| Number of digital outputs | 1 |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
| Operating voltage | 18...30 DC |
| Output function | normally open / closed; (configurable) |
| Output signal | switching signal; analog signal; IO-Link |
| Overload protection | yes |
| Pack quantity | 1 pcs. |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; current/voltage output; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay |
| Permanent current rating of switching output DC | 200 |
| Power-on delay time | < 3 |
| Pressure Rating | 0.05 |
| Probe length (L) | 728 |
| Process data analog | 4 |
| Process data binary | 1 |
| Product type | Electronic level and temperature sensor |
| Protection | IP 67 |
| Protection class | III |
| Reference point OP | 200 - 240 - 280 - 310 - 350 - 390 - 420 - 460 - 500 - 530 - 570 - 610 - OFF |
| Repeatability | ± 2 |
| Required master port class | A |
| Reset point rP | 50...580 |
| Resolution | 5 |
| Resolution of switching output | 0.5 |
| Reverse polarity protection | yes |
| SDCI standard | IEC 61131-9 |
| Set point SP | 60...590 |
| Short circuit protection | yes |
| SIO mode | yes |
| Specification Summary | Electronic level and temperature sensor; PNP/NPN; switching signal; analog signal; IO-Link; Probe length L 728 mm; Medium temperature (Coolants, water / oil) 0...35; (with climate tube E43102 35...55 °C) °C / 0...70 °C; Connector |
| Storage Temperature | -25...80 |
| Switch point accuracy | ± 1,5 |
| Total number of outputs | 2 |
| Transmission type | COM2 (38,4 kBaud) |
| Type of short-circuit protection | thermal, pulsed |
| Weight | 509.75 |
| Zero signal (current) | 4.0 |
| Zero signal (voltage) | 0.000000 |
Frequently Asked Questions
How do I get pricing for LT3924?
KKM Solutions is a quote-based industrial supplier, so prices are not listed online. Send the quote form on this page with your quantity, or email orderdesk@kkmsolutions.com, and our order desk will reply with pricing and availability within 1 business day.
Who manufactures the LT3924?
LT3924 is a IFM part. KKM Solutions sources IFM components to the exact manufacturer specification and cross-checks every order against manufacturer part data before it ships.
What are the key specifications of LT3924?
Key specifications include Active range A: 585; Ambient temperature: 0...60; Analog current output: 4...20, invertible; Analog voltage output: 0...10, invertible. The full specification table on this page lists every published attribute for this part.
How quickly can LT3924 ship?
In-stock items are dispatched the same business day for orders placed by 3 PM; sourced and quoted items ship per the quoted lead time. KKM Solutions ships worldwide — to your site, warehouse, or freight forwarder.
Related Products
IFM Electronic level and temperature sensor - LT3923
IFM Electronic level and temperature sensor - LT3922
IFM Electronic level and temperature sensor - LT3024
IFM Electronic level and temperature sensor - LT3023
IFM Electronic level and temperature sensor - LT3022
IFM