Ishida Equipment Parts Sourcing

Independent parts sourcing -- no Ishida affiliation

Ishida builds multihead combination weighers, checkweighers, and X-ray inspection systems used across food and non-food packaging lines. KKM Solutions is not affiliated with Ishida in any way and does not claim authorized-dealer, distributor, or service-partner status. What we offer is independent: when an Ishida line needs a replacement or wear part, we source it through our own distribution network and quote it against your part number, drawing, or equipment nameplate -- the same way we source for any other brand we don't manufacture.

Two ways we support an Ishida line

OEM-specific spare and wear parts -- weigh-hopper components, conveyor belting, and other consumable or wear components specific to Ishida weighers and inspection systems, sourced per order. We do not publish part numbers for these online; send us the part description, drawing, or nameplate photo and we quote what we can source.

Commodity components already in our catalog -- the sensors, PLC/automation hardware, drives and motors, and bearings that Ishida equipment is actually built from are products KKM Solutions already lists today, across the major brands. See the categories below.

Ishida equipment lines we support

These are real Ishida equipment lines — not an exhaustive list. If your model isn't shown, email us the nameplate details and we'll tell you what we can source.

Currently in our catalog

These are real, currently listed products from the component categories above. They aren't OEM-specific parts for the equipment on this page -- they're proof of what we already stock and can supply quickly alongside anything we source to order.

Sensors & Encoders

• Molex — Molex M12 Signal, A-Coded, Double-Ended Cordset with Knurled Hexnut and LED for PNP Sensors, 3 Poles 1200678473
• Molex — Molex M8 Signal, A-Coded, Single-Ended Cordset, 3 Poles, Female (90°) with LED for PNP Sensors, 0.25mm² (24 AWG) 1200868051
• Molex — Molex M8 Signal, A-Coded, Single-Ended Cordset, 3 Poles, Female (90°) with LED for PNP Sensors, 0.25mm² (24 AWG) 1200868337

Drives & Soft Starters

• Eurotherm — Eurotherm 125A440V220V2400V10FC1ENG Thyristor controller
• Eurotherm — Eurotherm 25A240VLGCENGNOFUSE00 25a thyristor heater control
• Eurotherm — Eurotherm 2PH100A600V Epower controller

Bearings

• INA — INA G38X48X4
• INA — INA G9X16X3
• INA — INA GAY45NPPB

Pneumatics

• Bucher — Bucher solenoid coil - 51020191424
• Bucher — Bucher solenoid coil - 51020191422
• Mindman — Mindman pneumatic solenoid valve - 100815015321002