Appleton Part Numbers Starting With S

Appleton S part numbers

• S125 S-125 Knockout Blank, 1-1/4 in, For Use With IMC/Rigid Conduit Fittings, Steel
• SB1 Appleton SB1 ETPTM SB1 Square Welded Corner Switch Box With 21/32 Openings in End and 1/2 in Conduit Knockouts, 3-3/4 x 2 in, 6.5 cu-in
• SBL3Q SBL-3-Q Dust-Ignitionproof Explosionproof Selector Switch Locking Device
• SCC125 Appleton SCC125 SCC-125 Threaded Split Conduit Coupling, 1-1/4 in, For Use With IMC/Rigid Conduit, Steel, Zinc Plated
• SCI75 NEER™ SCI-75 Insulated Throat Squeeze Connector, 3/4 in Trade, 0.94 to 1.16 in Cable Openings, Die Cast Zinc
• SCR1032 ETPTM SCR1032 Ground Screw, #10-32 Screw, 3/8 in OAL, Steel
• SCR1032PTL10B O-Z/Gedney ETP™ SCR1032PTL10B Washer Head Grounding Screw With Pigtail, For Use With Outlet and Switch Box, 3/8 in L x 10-32 Thread Ground Screw and 10 in Solid Bare, 14 AWG Wire Pigtail, Steel, Green
• SD50A Appleton SD50A ReelitesTM SD-50A SD Series Static Discharge Grounding Reel, 8-1/2 in Dia, 50 ft L, 1 Ohm, Galvanized Steel Cable
• SD50AN Reelites™ SD50AN SD Series Static Discharge Grounding Reel, 50 ft L, 1 Ohm, Galvanized Steel Cable, Nylon Insulation
• SDG SDG Permanent Grounding Stud, 3/8 in to 16 UNC-2B Thread, For Use With ReeliteTM Series SD Static Discharge Grounding and 2.38 mm Hole, Steel
• SDU2024B Appleton SDU2024B SDU UPS Power Supply Module, 480 V, 20 A
• SEC192 NEER™ SEC-192 Service Entrance Cap, #8/3 to 1/3, For Use With Type SE Cable, Die Cast Zinc
• SEH75 UNILETS™ SEH-75 Conduit Outlet Box, 3/4 in Hub, Malleable Iron, Triple Coated
• SEHGK Unilets™ SEH-GK Conduit Body Gasket, For Use With SEH Conduit Outlet Box and Cover, Composition Fiber
• SEHKB SEHK-B Cast Round Box Cover, Blank Cover, Steel
• SEHL50 UNILETS™ SEHL-50 Conduit Outlet Box, 1/2 in Hub, Malleable Iron, Triple Coated
• SEHL75 Appleton SEHL75 UNILETSTM SEHL-75 Tapped Round Base Outlet Box With Internal Ground Screw, (2) 3/4 in Hub, Malleable Iron, Electro-Zinc Plated/Chromate/Epoxy Powder Coated
• SEHT75 Appleton SEHT75 UNILETSTM SEHT-75 Conduit Outlet Box, 3/4 in Hub, Malleable Iron, Triple Coated
• SLB125 NEER™ SLB-125 Standard Service Entrance Ells, 1-1/4 in Hub, Die Cast Aluminum, Epoxy Powder Coated
• SLB200 NEER™ SLB-200 Raintight Service Entrance Pulling Ells With Cover and Gasket, 2 2 in Hubs, Die Cast Aluminum, Epoxy Powder Coated
• SLC1075 Appleton SLC1075 Locking Coupling, For Use With UNILETSTM Fixture Hanger Bracket, 1 in, Steel
• SLC75 Appleton SLC75 Type LC Locking Coupling With Set Screw, For Use With Unilets® Fixture Hanger Bracket, 3/4 in NPT, Steel
• SLNP0F0N Appleton SLNP0F0N ContenderTM SLNP0F0N Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw
• SLNPHAQ Appleton SLNPHAQ ContenderTM SLNPHAQ Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw
• SLNPSRSQ Appleton SLNPSRSQ ContenderTM SLNPSRSQ Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw, Gray Field
• SLNPSS Contender™ SLNP-SS Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw
• SMPBLG Appleton SMPBLG Single Gasketed Replacement Locking Guard, 1/4 in, For Use With Maintained Pushbutton, Polypropylene
• SMPBU1Q SMPBU1Q Heavy Duty Factory Sealed Universal Non-Illuminated Pushbutton With 1/2 in to 3/4 in Enlarger and Emergency Stop Nameplate, 1NO-1NC Contact, Maintained Contact, Red
• SN3000 NEER™ SN-3000 SN Series Cable Staple, 1.3 in W Crown, 1.32 in L Leg, 6 AWG Cable, Steel
• SNP0FFQ Contender™ SNP-OFF-Q Name Plate With Internal Ground Screw, Rectangle Plate
• SNP0PENQ Appleton SNP0PENQ ContenderTM SNP0PENQ Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw
• SNPCL0SEQ Appleton SNPCL0SEQ ContenderTM SNPCL0SEQ Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw
• SNPTESTQ Contender™ SNPTESTQ Dust-Ignitionproof Explosionproof Name Plate With Internal Ground Screw, Rectangular Plate
• SNTC250 SNTC-250 Compression Connector, 2-1/2 in Trade, For Use With Threadless Rigid Conduit, Malleable Iron/Steel
• SNTC300 SNTC-300 Compression Connector, 3 in Trade, For Use With Threadless Rigid Conduit, Malleable Iron/Steel
• SNTC350 Appleton SNTC350 SNTC-350 Compression Connector, 3-1/2 in Trade, For Use With Threadless IMC/Rigid Conduit, Malleable Iron
• SNTCC150 SNTCC-150 Threadless Set Screw Coupling, 1-1/2 in, For Use With IMC/Rigid Conduit, Steel
• SNTCC75 Appleton SNTCC75 SNTCC-75 Threadless Set Screw Coupling, 3/4 in, For Use With IMC/Rigid Conduit, Steel
• SPBBDU1Q Appleton SPBBDU1Q Dura Cap Pushbutton Switch Assembly
• SPBBU1Q Appleton SPBBU1Q Heavy Duty Factory Sealed Universal Non-Illuminated Pushbutton With 1/2 in to 3/4 in Enlarger, 1NO-1NC Contact, Momentary Contact
• SPBBU2DBL SPBBU2DBL Double Push Button Switch With Guard, 1/2 in NPSM, 1NO-1NC Contact
• SPLNSGRB Intraground® SPLNSGRB Short Stem Pilot Light With Jewel and Guard, 120 V AC, 6 W, Panel Mount
• SPLSCLB Appleton SPLSCLB Pigtail Pilot Light, 120 V AC, 6 W
• SPLSGRB Intraground™ SPLSGRB Factory Sealed Pilot Light With 6S6 120 V AC Incandescent Lamp, Jewel and Guard, 120 V AC, 6 W, Panel Mount
• SPLSSCB Appleton SPLSSCB Pilot Light Chamber, For Use With ECS Selector Switch Control Stations
• SSBA12Q Intraground™ SSBA12Q ECS Explosionproof Non-Illuminated Selector Switch Assembly, 1/2 in, 1NO-1NC Contact, Knob Operator
• SSBA13Q Appleton SSBA13Q Contender® SSBA13Q EFDB Dust Ignitionproof Non-Illuminated Explosionproof Selector Switch, 1/2 in
• SSBA23Q Contender™ SSBA23Q EDKB 4-Circuit Selector Switch Assembly, 1/2 in, 2NO-2NC Contact
• SSBAS13 Appleton SSBAS13 ECS Selector Switch Assembly, 1/2 in
• SSBASRA23 SSBASRA23 4-Circuit Switch Assembly, For Use With EDKB Series Cover and Contender™ Series Factory Sealed Explosionproof/Dust-Ignitionproof Selector Switch
• SSMTG UniCodeTM SSMTG Mounting Feet, For Use With UnicodeTM Factory Sealed Control Stations and Pilot Lights, 304 Stainless Steel
• ST125L ST125L Non-Insulated Straight Liquid Tight Conduit Connector With External Grounding Lug, 1-1/4 in Trade, Malleable Iron, Electroplated Zinc
• ST150 ST-150 Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 1-1/2 in Trade, Straight, Malleable Iron, Triple Coated
• ST150FSR ST-150FSR Concretetight Non-Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1-1/2 in Trade, 1.87 to 1.9 in Cable Openings, Malleable Iron
• ST200AL ST-200AL Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 2 in Trade, Straight, Copper Free Aluminum
• ST250FSR ST-250FSR Concretetight Non-Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 2-1/2 in Trade, 2.84 to 2.88 in Cable Openings, Malleable Iron
• ST300F ST-300F Liquid Tight Oiltight Raintight Conduit Connector With Threaded Hub, 3 in Trade, Straight, Malleable Iron, Triple Coated
• ST300FSR ST-300FSR Concretetight Non-Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3 in Trade, 3.46 to 3.5 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• ST38AL ST-38AL Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 3/8 in Trade, Straight, Copper Free Aluminum
• ST38F ST-38F Liquid Tight Oiltight Raintight Conduit Connector With Threaded Hub, 3/8 in Trade, Straight, Steel, Zinc Electroplated
• ST45125L ST45125L Non-Insulated Liquid Tight Conduit Connector With External Grounding Lug, 1-1/4 in Trade, 45 deg, Malleable Iron, Electroplated Zinc
• ST45300L Appleton ST45300L ST-45300L Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 3 in Trade, 1 to 4/0 AWG Cable Openings, 45 deg, Malleable Iron, Triple Coated
• ST45400L Appleton ST45400L ST-45400L Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 4 in Trade, 1 to 4/0 AWG Cable Openings, 45 deg, Malleable Iron, Triple Coated
• ST50AL ST-50AL Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 1/2 in Trade, Straight, Copper Free Aluminum
• ST50FSR ST-50FSR Concretetight Non-Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1/2 in Trade, 0.82 to 0.84 in Cable Openings, Steel, Zinc Electroplated
• ST90125 ST-90125 Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 1-1/4 in Trade, 90 deg, Malleable Iron, Triple Coated
• ST90250L ST-90250L Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 2-1/2 in Trade, 1 to 4/0 AWG Cable Openings, 90 deg, Malleable Iron, Triple Coated
• ST90300L ST90300L Non-Insulated Liquid Tight Conduit Connector With External Grounding Lug, 3 in Trade, 90 deg, Malleable Iron, Electroplated Zinc
• ST9038AL Appleton ST9038AL ST-9038AL Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 3/8 in Trade, 90 deg, Copper Free Aluminum
• ST9038L Appleton ST9038L ST-9038L Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 3/8 in Flex x 1/2 in Hub Trade, 14 to 4 AWG Cable Openings, 90 deg, Malleable Iron, Triple Coated
• ST90400L Appleton ST90400L ST-90400L Plain Throat Liquid Tight Conduit Connector, 4 in Trade, 90 deg, Malleable Iron, Tri-Coated
• ST9050 ST-9050 Liquid Tight Oiltight Raintight Conduit Connector With Plain Throat, 1/2 in Trade, 90 deg, Malleable Iron, Triple Coated
• STB100 STB-100 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1 in Trade, Straight, Steel, Zinc Electroplated
• STB100SR STB-100SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1 in Trade, 1.29 to 1.32 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit, Steel
• STB125 STB-125 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1-1/4 in Trade, Straight, Malleable Iron, Triple Coated
• STB250L STB-250L Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 2-1/2 in Trade, 1 to 4/0 AWG Cable Openings, Straight, Malleable Iron, Triple Coated
• STB250SR Appleton STB250SR STB-250SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 2-1/2 in Trade, 2.84 to 2.88 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STB300 STB-300 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 3 in Trade, Straight, Malleable Iron, Triple Coated
• STB350 STB-350 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 3-1/2 in Trade, Straight, Malleable Iron, Triple Coated
• STB38SR STB-38SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3/8 in Flex x 1/2 in Hub Trade, 0.69 to 0.71 in Cable Openings, Steel, Zinc Electroplated
• STB45125L STB45125L Insulated Liquid Tight Conduit Connector With External Grounding Lug, 1-1/4 in Trade, 45 deg, Malleable Iron, Electroplated Zinc
• STB45250L STB-45250L Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 2-1/2 in Trade, 1 to 4/0 AWG Cable Openings, 45 deg, Malleable Iron, Triple Coated
• STB45250SR STB-45250SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 2-1/2 in Trade, 2.84 to 2.88 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STB45300L Appleton STB45300L Insulated Liquid Tight Conduit Connector With External Grounding Lug, 3 in Trade, 45 deg, Malleable Iron, Electroplated Zinc
• STB45300SR STB-45300SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3 in Trade, 3.46 to 3.5 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit, Malleable Iron
• STB4538 STB-4538 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 3/8 in Trade, 45 deg, Malleable Iron, Triple Coated
• STB45400 STB-45400 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 4 in Trade, 45 deg, Malleable Iron, Triple Coated
• STB4550L STB-4550L Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1/2 in Trade, 14 to 4 AWG Cable Openings, 45 deg, Malleable Iron, Triple Coated
• STB4575SR STB-4575SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3/4 in Trade, 1.03 to 1.05 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STB50 Appleton STB50 STB-50 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1/2 in Trade, Straight, Steel, Zinc Electroplated
• STB90150SR STB-90150SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1-1/2 in Trade, 1.87 to 1.9 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STB90250 STB-90250 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 2-1/2 in Trade, 90 deg, Malleable Iron, Triple Coated
• STB90300L STB90300L Insulated Liquid Tight Conduit Connector With External Grounding Lug, 3 in Trade, 90 deg, Malleable Iron, Electroplated Zinc
• STB9038L STB-9038L Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 3/8 in Flex x 1/2 in Hub Trade, 14 to 4 AWG Cable Openings, 90 deg, Malleable Iron, Triple Coated
• STB9038SR STB-9038SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3/8 in Trade, 0.69 to 0.71 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STB90400 STB-90400 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 4 in Trade, 90 deg, Malleable Iron, Triple Coated
• STB9050 STB-9050 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1/2 in Trade, 90 deg, Malleable Iron, Triple Coated
• STB9050L STB-9050L Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1/2 in Trade, 14 to 4 AWG Cable Openings, 90 deg, Malleable Iron, Triple Coated
• STF100 STF-100 Replacement Grounding Ferrule, 1 in, For Use With ST Series Liquid Tight Connector, Steel
• STF300 Appleton STF300 STF-300 Replacement Patented Grounding Ferrule, 3 in, For Use With: ST Series Liquid Tight Connector and Liquid Tight Flexible Metal Conduit, Aluminum
• STF350 Appleton STF350 STF-350 Replacement Grounding Ferrule, 3-1/2 in, For Use With ST Series Liquid Tight Flexible Metal Conduit, Aluminum
• STF75 STF-75 Replacement Grounding Ferrule, 3/4 in, For Use With ST Series Liquid Tight Connector, Steel
• STG100 STG-100 Sealing Gasket Assembly, 1 in, For Use With Liquid Tight Flexible Metallic Conduit, Steel Backed Neoprene
• STG125 STG-125 Sealing Gasket Assembly, 1-1/4 in, For Use With Liquid Tight Flexible Metallic Conduit, Steel Backed Neoprene
• STN100 STN-100 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 1 in Trade, Straight, Steel, Zinc Electroplated
• STN125SR Appleton STN125SR STN-125SR Straight Conduit Connector With Insulated Throat, Wire Mesh Strain Relief, 1-1/4 in Trade, For Use With Liquidtight Flexible Metal Conduit, Malleable Iron, Electro-Plated Zinc/Chromate/Epoxy Powder Coated
• STN250SR STN-250SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 2-1/2 in Trade, 2.84 to 2.88 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STN38SR STN-38SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 3/8 in Trade, 0.69 to 0.71 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit, Steel
• STN400 STN-400 Liquid Tight Oiltight Raintight Conduit Connector With Insulated Throat, 4 in Trade, Straight, Malleable Iron, Triple Coated
• STN50SR STN-50SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1/2 in Trade, 0.82 to 0.84 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit, Steel
• STN9050SR STN-9050SR Insulated Throat Oiltight Raintight Liquid Tight Conduit Connector With Stainless Steel Wire Mesh Strain Relief, 1/2 in Trade, 0.82 to 0.84 in Cable Openings, For Use With Liquid Tight Flexible Metallic Conduit
• STNM9075 STNM-9075 Conduit Connector With Insulated Throat, 3/4 in Trade, 90 deg, Steel
• STNMSR200 Appleton STNMSR200 STNM-SR200 Strain Relief Wire Mesh, Stainless Steel, Stainless Steel
• STSR125 ST-SR125 ST-SR Liquid Tight Connector, 1-1/4 in Trade, Stainless Steel
• STSR200 ST-SR200 Liquid Tight Connector, 2 in Trade, Stainless Steel
• STSR300 ST-SR300 Liquid Tight Connector, 3 in Trade, Stainless Steel
• STSR38 Appleton STSR38 ST-SR38 Liquid Tight Connector, 3/8 in Trade, Stainless Steel
• SX115 Appleton SX115 Adjustable Bar Hanger With Slide-On Stud, Steel, Zinc Plated
• SX1154012 O-Z/Gedney ETPTM SX115-4O-1/2 Box With Knockouts, Steel, 15.5 cu-in, 8 Knockouts
• SX115551L Appleton SX115551L SX115-551L Octagon Box, Steel, 15.5 cu-in, 10 Knockouts, 1-1/2 in D
• SX115561L Appleton SX115561L SX115-561L Octagon Box, Steel, 15.5 cu-in, 6 Knockouts, 1-1/2 in D
• SX18 Appleton SX18 ETPTM SX18 Adjustable Bar Hanger With Slide-On Clip and Slide-On Stud, Steel
• SX18561L Appleton SX18561L SX18-561L Octagon Box, Steel, 15.5 cu-in, 6 Knockouts, 1-1/2 in D
• SX26 Appleton SX26 ETPTM SX26 Adjustable Bar Hanger With Slide-On Clip and Slide-On Stud, Steel