Endress+Hauser Promass 83I
Endress+Hauser 83I - Flow measurement - Ambient temperature: -20...+65°C (-4...+140°F); Degree of protection: IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure; Communication: HART PROFIBUS PA Profibus DP FOUNDATION Fieldbus.
Endress+Hauser 83I is a Flow measurement catalog item from Endress+Hauser. The manufacturer's published data for this part number specifies Ambient temperature: -20...+65°C (-4...+140°F) and Degree of protection: IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure.
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Published specifications for this part include Communication: HART PROFIBUS PA Profibus DP FOUNDATION Fieldbus; + output: 4...20mA Pulse/Frequency (10KHz), active/passiveRelays/Status; Power Supply: DC 16 to 62 V AC 85 to 260 V (45 to 65 Hz) AC 20 to 55 V (45 to 65 Hz); Measuring range: 0...180'000 kg/h 0... 20'000 cP (viscosity); Measuring principle: Coriolis; Outputs: 0/4...20mA Pulse Frequency (10KHz), active/passive Relays/Status; Diameter: DN 8...80 5/16"...3"; Nominal diameter range: DN 8 to 80 (⅜ to 3"); Process pressure: PN 16...100 Cl 150...600 JIS 10...63K; Display/Operation: Four line backlit Touch control; Product safety: CE, C-tick, EAC marking; Hazardous area approvals: ATEX, IECEx, FM, CSA, NEPSI. See the Specifications tab on this page for the full technical table.
| + output | 4...20mA Pulse/Frequency (10KHz), active/passiveRelays/Status |
|---|---|
| Advantages | Balanced single-tube system. Dual mode for independent viscosity measurement. High vibration immunity. Easy and cost-effective mounting. Measurement is independent of fluid properties. Promass 83 with "Touch Control": Operation from outside without opening the house. Software pagackes may be updated for: - Dosage applications - Concentration measurement - Advanced diagnostics "Quick Setup" menus for straightforward commissioning in the field. |
| Ambient temperature | -20...+65°C (-4...+140°F) |
| Ambient temperature range | Standard: –20 to +60 °C (–4 to +140 °F) Option: –40 to +60 °C (–40 to +140 °F) |
| Certificates / Approvals | ATEX FM CSA |
| Characteristic / Application | Balanced single-tube system, "Fit-and-Forget" installation Design: Easy to clean, hygienic, careful handling of the medium - chemically resistant material |
| Communication | HART PROFIBUS PA Profibus DP FOUNDATION Fieldbus |
| Degree of protection | IP67, type 4X enclosure. Remote transmitter: IP67, type 4X enclosure |
| Diameter | DN 8...80 5/16"...3" |
| Digital communication | HART, PROFIBUS PA/DP, FOUNDATION Fieldbus, Modbus RS485, EtherNet/IP |
| Display/Operation | Four line backlit Touch control |
| Ex - approvals | ATEX FM CSA |
| Features | S-DAT, T-DAT, F-Chip Validation Quick Set-up 3 Totalizers Pulsating Flow Advanced diagnostics Batching Concentration measurement |
| Functional safety | Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 |
| Hazardous area approvals | ATEX, IECEx, FM, CSA, NEPSI |
| Hygienic approvals and certificates | 3-A, EHEDG |
| Inputs | Status Current input |
| Main features | Balanced singe-tube system, "Fit-and-Forget" installation, viscosity measurement Design: Easy to clean, hygienic, careful handling of the medium |
| Material certificates | 3.1 material |
| Max. measurement error | Mass flow (liquid): ±0.1 % Volume flow (liquid): ±0.1 % Mass flow (gas): ±0.5 % Density (liquid): ±0.0005 g/cm³ |
| Max. process pressure | PN 100, Class 600, 63K |
| Measured variables | Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity |
| Measurement error | Mass flow: +-0.1% Volume flow: +-0.5% Viscosity: ± 5% ± 0.5 mPa•s (Newtonian fluids) Density: +- 0.004g/cc |
| Measuring principle | Coriolis |
| Measuring range | 0...180'000 kg/h 0... 20'000 cP (viscosity) |
| Medium temperature range | –50 to +150 °C (–58 to +302 °F) |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR |
| Nominal diameter range | DN 8 to 80 (⅜ to 3") |
| Other approvals and certificates | 3.1 material, calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR, SIL PED, CRN 3-A |
| Outputs | 0/4...20mA Pulse Frequency (10KHz), active/passive Relays/Status |
| Power Supply | DC 16 to 62 V AC 85 to 260 V (45 to 65 Hz) AC 20 to 55 V (45 to 65 Hz) |
| Pressure approvals and certificates | PED, CRN |
| Pressure range | PN 16...100 CI 150...600 JIS 10...63K |
| Process pressure | PN 16...100 Cl 150...600 JIS 10...63K |
| Process temperature | -50...+150°C (-58...+302°F) |
| Product headline | Combines in‐line viscosity and flow measurement with extended transmitter functionality. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment. |
| Product safety | CE, C-tick, EAC marking |
| Protection electronic | IP 67 NEMA 4x |
| Sensor features | Energy‐saving – full bore design enables minimal pressure loss. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. Straight, easy cleanable single‐tube system. TMB technology. |
| Sensor housing material | 1.4301/1.4307 (304L), corrosion resistant |
| Transmitter features | Quality – software for filling & dosing, density & concentration, advanced diagnostics. Flexible data transfer options – numerous communication types. Automatic recovery of data for servicing. 4‐ line backlit display with touch control. Device in compact or remote version. |
| Transmitter housing material | Powder‐coated die‐cast aluminium 1.4301 (304), sheet CF3M (316L), cast |
| Wetted materials | Measuring tube: Titanium grade 9 Connection: Titanium grade 2 |
| Wetted parts | Titan |
Frequently Asked Questions
How do I get pricing for 83I?
KKM Solutions is a quote-based industrial supplier, so prices are not listed online. Send the quote form on this page with your quantity, or email orderdesk@kkmsolutions.com, and our order desk will reply with pricing and availability within 1 business day.
Who manufactures the 83I?
83I is a Endress+Hauser part. KKM Solutions sources Endress+Hauser components to the exact manufacturer specification and cross-checks every order against manufacturer part data before it ships.
What are the key specifications of 83I?
Key specifications include + output: 4...20mA Pulse/Frequency (10KHz), active/passiveRelays/Status; Advantages: Balanced single-tube system. Dual mode for independent viscosity measurement. High vibration immunity. Easy and cost-effective mounting. Measurement is independent of fluid properties. Promass 83 with "Touch Control": Operation from outside without opening the house. Software pagackes may be updated for: - Dosage applications - Concentration measurement - Advanced diagnostics "Quick Setup" menus for straightforward commissioning in the field.; Ambient temperature: -20...+65°C (-4...+140°F); Ambient temperature range: Standard: –20 to +60 °C (–4 to +140 °F) Option: –40 to +60 °C (–40 to +140 °F). The full specification table on this page lists every published attribute for this part.
How quickly can 83I ship?
In-stock items are dispatched the same business day for orders placed by 3 PM; sourced and quoted items ship per the quoted lead time. KKM Solutions ships worldwide — to your site, warehouse, or freight forwarder.
Related Products
Endress+Hauser Endress+Hauser Promass 83H
Endress+Hauser Endress+Hauser Promass 83O
Endress+Hauser Endress+Hauser Promass 83P
Endress+Hauser Endress+Hauser Promass 83F
Endress+Hauser Endress+Hauser Promass 83S
Endress+Hauser