Allen-Bradley PowerFlex 700S AC Drive 20D 20DJ125A0NYNANDNK
Allen-Bradley 20DJ125A0NYNANDNK - industrial components - Operating Temperature: 50 °C @ 650V DC, normal duty; Storage Temperature: -40 °C; Relative Humidity: 5...95% noncondensing.
The 20DJ125A0NYNANDNK from Allen-Bradley is listed under industrial components in our catalog. The manufacturer's published data for this part number specifies Operating Temperature: 50 °C @ 650V DC, normal duty and Storage Temperature: -40 °C.
The specification set recorded for this part number covers Relative Humidity: 5...95% noncondensing; Lifecycle Status: Discontinued; Build America, Buy America: No; Repair Options Available: Yes; Enclosure Type: IP20/NEMA/UL Type 1; Sub Brand: PowerFlex 700S AC Drive; Degree of protection (IP): IP20; Degree of protection (NEMA): 1; Altitude: 1000 m (3300 ft.) maximum without derating; Brake IGBT: Brake IGBT installed; Brake Resistor: No internal brake resistor; Feedback Options: Future Use. See the Specifications tab on this page for the full technical table.
| Acceleration/deceleration | Independently progmable accel and decel times adjustable from 0 to 6553.5 in 0.1 s increments |
|---|---|
| Additional configuration | Phase II DriveLogix 5730 |
| Altitude | 1000 m (3300 ft.) maximum without derating |
| Atmosphere | Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust, If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosi |
| Battery | 1769-BA 0.59 g lithium |
| Brake IGBT | Brake IGBT installed |
| Brake Resistor | No internal brake resistor |
| Build America, Buy America | No |
| Cable | 20D-DL2-CL3, 20D-DL2-CR3 |
| Carrier frequency | Drive rating: 4 kHz, settings: 2, 4, 6, 8, 10 kHz (6 kHz is for V/Hz ops only) |
| Compact I/O configuration | Up to (16) modules (8 modules per bank or 4 max on either side of the power supply) |
| Control logic noise immunity | Showering arc transients upto 1500V peak |
| Control method | Induction motor and brushless motor: sine coded PWM with progmable carrier frequency, indirect self organized, field-oriented control, current-regulated, ratings apply to all drives, refer to the PowerFlex 700S Phase ll control reference manual, public |
| Control options | Phase II control with synchlink and logix expansion board, expanded cassette |
| Current limit capability | Independent motoring and regenerative power limits progmable to 800% of rated output current |
| DC bus undervoltage trip | Adjustable |
| Degree of protection (IP) | IP20 |
| Degree of protection (NEMA) | 1 |
| Displacement power factor | 0.98 across speed range |
| Documentation | No documentation |
| Drive overcurrent trip | Software current limit: 105% of motor rated to 200% of drive rated current |
| Drive to motor power ratio, max | The drive to motor rating cannot exceed a 2:1 ratio |
| Efficiency | 97.5% at rated A, nominal line volts |
| Electronic motor overload protection | Class 10 motor overload protection according to NEC article 430 and motor over-temperature protection according to NEC article 430.126 (A)(2). UL 508C file E59272 |
| Enclosure Type | IP20/NEMA/UL Type 1 |
| Encoder voltage supply | 5V DC or 12V DC 320 mA/channel, 5V DC minimum high state voltage state of 0.4V DC @ 12V DC minimum high state voltage of 7.0V DC, maximum low state voltage of 0.4V DC |
| Feedback option | Future use |
| Feedback Options | Future Use |
| Filter Options | W/ EMC Filt & ComModeChoke |
| Fuse current rating | 200A @ 650V DC, normal duty |
| Ground fault trip | Phase-to-ground on drive output |
| Heat sink thermistor | Monitored by microprocessor overtemperature trip |
| Human interface model | No HIM (no blank plastic inserted) |
| Input current rating | 137.1A @ 650V DC, normal duty |
| Input frequency, max | 400 Hz |
| Input phases | Six-pulse, 3-phase input provides full rating for all drives, single-phase ops provides 50% of rated current |
| Input voltage rating | 650V DC no precharge |
| Integrated breaking resistance | false |
| Intermittent overload | 110% overload capability for up to 1 min, 150% overload capability for up to 3 s |
| Internal Communication Module | No communication module |
| Internal EMC filtering | With EMC filter & common mode choke |
| Lifecycle Status | Discontinued |
| Line transients | Up to 6000 volts peak per IEEE C62.41-1991 |
| Logic control ride-thru | 0.25 s, drive not running |
| Mains voltage | 650 V |
| Max. output frequency | 400 Hz |
| Max. output voltage | 932 V |
| Number of analogue inputs | 3 |
| Number of analogue outputs | 2 |
| Number of digital inputs | 6 |
| Number of digital outputs | 2 |
| Number of phases input | 3 |
| Number of phases output | 3 |
| Operating Temperature | 50 °C @ 650V DC, normal duty |
| Output current rating | 125 A, 100 Hp normal duty, 75 Hp heavy duty, frame 5 |
| Output current, 1 min | 144A @ 650V DC, heavy duty |
| Output current, 3 sec | 168A @ 650V DC, heavy duty |
| Output current, continuous | 96A @ 650V DC, heavy duty |
| Output frequency range | 0 Hz |
| Output voltage range | 0 to rated motor voltage |
| Power ride-thru | 15 ms at full load |
| PWM frequency | 4 kHz @ 650V DC, normal duty |
| Rated power rating | 75Hp @ 650V DC, heavy duty |
| Relative Humidity | 5...95% noncondensing |
| Relative symmetric net voltage tolerance | 10 % |
| Repair Options Available | Yes |
| S-curve time | Adjustable 0.5...4.0 s |
| Selectable motor control | Field oriented control with and without a ftdback device and permanent magnet motor control |
| Serial cable | 1761-CBLPM02 to 1761-NET-AIC, 1761-CBLPA00 to 1761-NET-AIC, 1756-CP3 directly to controller,1747-CP3 directly to controller, category 3(2) |
| Shock | 10 G peak for 11 ms duration (±1.0 ms) |
| Short circuit current, max | Using recommended fuse or circuit breaker type: maximum short circuit current rating to match specified fuse/circuit breaker capability ≤200000 A |
| Short circuit trip | Phase-to-phase on drive output |
| Sound level | Frame 5: 71 dB @ 200 CFM fan speed |
| Speed control | Speed regulation - without ftdback: 0.1% of base speed across 120:1 speed range, 120:1 operating range, 50 rad/sec bandwidth |
| Stop modes | Multiple progmable stop modes including - RA, Coast, and Current Limit |
| Storage Temperature | -40 °C |
| Sub Brand | PowerFlex 700S AC Drive |
| Surrounding air temperature without derating | NEMA/UL Type 1: 0° to 40° C (32° to 104° F) |
| Torque regulation | Torque regulation - without ftdback: ±5%, 600 rad/sec bandwidth |
| User available memory base | 1.5 MB (compactflash for non-volatile storage also available) |
| Vibration | 0.152 mm (0.006 in.) displacement, 1 G peak, 5.5 Hz |
| Watt loss | 1263 W @ 650V DC @ 75Hp heavy duty |
| Weight, approx | Drive: 37.19 kg @ 75Hp @ 480V (55 kW, 400V), frame 5 |
| Width, approx | 340.8 mm @ 100Hp @ 480V (55 kW, 400V) |
Frequently Asked Questions
How do I get pricing for 20DJ125A0NYNANDNK?
KKM Solutions is a quote-based industrial supplier, so prices are not listed online. Send the quote form on this page with your quantity, or email orderdesk@kkmsolutions.com, and our order desk will reply with pricing and availability within 1 business day.
Who manufactures the 20DJ125A0NYNANDNK?
20DJ125A0NYNANDNK is a Allen-Bradley part. KKM Solutions sources Allen-Bradley components to the exact manufacturer specification and cross-checks every order against manufacturer part data before it ships.
What are the key specifications of 20DJ125A0NYNANDNK?
Key specifications include Acceleration/deceleration: Independently progmable accel and decel times adjustable from 0 to 6553.5 in 0.1 s increments; Additional configuration: Phase II DriveLogix 5730; Altitude: 1000 m (3300 ft.) maximum without derating; Atmosphere: Drive must not be installed in an area where the ambient atmosphere contains volatile or corrosive gas, vapors, or dust, If the drive is not going to be installed for a period of time, it must be stored in an area where it will not be exposed to a corrosi. The full specification table on this page lists every published attribute for this part.
How quickly can 20DJ125A0NYNANDNK ship?
In-stock items are dispatched the same business day for orders placed by 3 PM; sourced and quoted items ship per the quoted lead time. KKM Solutions ships worldwide — to your site, warehouse, or freight forwarder.
Related Products
Allen-Bradley Allen-Bradley PowerFlex 700S AC Drive 730 A 400 kW…
Allen-Bradley Allen-Bradley PowerFlex 700S AC Drive 20D 20DJ261N0ENNBNASE
Allen-Bradley Allen-Bradley PowerFlex 700S AC Drive 20D 20DJ261N0NNNBCANE
Allen-Bradley Allen-Bradley PowerFlex 700S AC Drive 650 A 355 kW…
Allen-Bradley Allen-Bradley PowerFlex 700S AC Drive 20D 20DJ300N0ENNBDANE
Allen-Bradley