WAGO 2642-1107 — PCB Interconnect

PCB terminal block, 2642 Series, with 5 mm pin spacing Connect conductors quickly and easily with this PCB terminal block (item number 2642-1107). It is a universal connector that can be used practically anywhere, e.g., as a pluggable PCB connector, panel feedthrough header, connector for rail-mount terminal blocks, or a floating connector for different mounting methods. Conductors should only be connected to this PCB terminal block if their strip length is between 8 and 9 mm . Featuring one conductor terminal along with Push-in CAGE CLAMP®, this connector outperforms the competition. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, offering a key advantage: It allows direct insertion of both solid and fine-stranded conductors with ferrules without needing tools. No preparation is required; for example, crimping the conductor's ferrule is not necessary. Dimensions: (36.5 x 17.1 x 14.5) mm (width x height x depth). Depending on the conductor type, this PCB terminal block is designed for conductor cross sections ranging from 0.14 mm² to 2.5 mm². Perfect termination for all conductor types thanks to Push-in CAGE CLAMP® Tin is used for coating the contact surfaces. An operating tool is used to operate this PCB terminal block. The PCB terminal block is designed for THT soldering. The conductor is designed to be inserted into the board at an angle of 0°.. Actuation via operating tool Ready to install, immediately usable Pin spacing: 5 mm Reliable soldering thanks to THT The right solution for every wiring task